homebridge-smarthomeng

Version v2 is a complete rewrite from scratch and a breaking update.
You need to adapt your config.json !

Currently supported

This plugin currently supports the following services (and characteristics):

• LightBulb (on/off, brightness, hue, saturation, r, g, b, w)
• Fan (active)
• TemperatureSensor (current temperature)
• Thermostat (current- / target temperature, currentheatingcoolingstate)
• MotionSensor (motion detected)
• OccupancySensor (presence detected)
• ContactSensor (contact state)
• Switch (on/off)
• Outlet (on/off)
• WindowCovering (CurrentPosition, TargetPosition).

Other accessories are being worked on and will be added as soon as ready.

Requirements

• SmartHomeNG
• homebridge

Installation

Install nodejs >=14.18.1

See NodeJS website for details depending on your OS.

Install libavahi-compat-libdnssd-dev lib

For me i needed these libraries to be installed for my homebridge to work. See their Homepage for installation instructions.
Below is what i did on my Debian Bullseye installation:

sudo apt install libavahi-compat-libdnssd-dev

Install homebridge >=1.3.5 from NPM repository

npm install -g homebridge --unsafe-perm

Install this plugin from NPM repository

npm install -g homebridge-smarthomeng --unsafe-perm

Configuration

If you already have a working homebridge installation just add the platform section into your existing config. If you are a new homebridge user you have to create a config.json file in the .homebridge directory. You'll find that directory in your home folder.

Common characteristics

The following characteristics are valid for all accessories.

Mandatory:

{
"type": "OccupancySensor",
"name": "Presence kitchen",
}

Optional:

{
"manufacturer": "Preussen",
"model": "Motion 360 KNX",
}

Doorbell

TODO

Fan

TODO

LightBulb

TODO

Occupancy sensor

TODO

Motion sensor

TODO

Contact sensor

TODO

Switch

TODO

Outlet

TODO

Temperature sensor

TODO

### Thermostat TODO

WindowCovering

In addition to the common characteristics the following are available.

Mandatory:

{
"CurrentPosition": "EG.Buero.Rolladen.Position",
"TargetPosition": "EG.Buero.Rolladen.ZielPosition",
}

The current moving state and direction is automatically derived from the difference between the current and target position.

Optional:

{
"CurrentPositionMin": 0,
"CurrentPositionMax": 255,
"CurrentPositionInverted": true,
"TargetPositionMin": 0,
"TargetPositionMax": 255,
"TargetPositionInverted": true
}

HomeKit works with values between 0 and 100 where 0 is completely closed and 100 is open.
My KNX installation, as example, needs values between 0 and 255 where 255 is completely closed and 0 is open.
The above optional parameters allow you to specify the neede range for your device. If needed the values can be inverted at the same time. The plugin then transposes the values in both directions.

Example configuration file

This is an example config file which just uses this plugin and some example SmartHomeNG items.

{
    "bridge": {
        "name": "SmartHomeNG",
        "username": "CC:22:3D:E3:DE:37",
        "port": 51138,
        "pin": "655-59-9284"
    },

    "platforms": [
        {
            "platform": "SmartHomeNG",
            "name": "SmartHomeNG",
            "host": "smarthome.iot.wagener.family",
            "accessories": [
                {
                    "type": "Outlet",
                    "name": "Steckdose Esszimmer",
                    "On": "EG.Esszimmer.Steckdose"
                },
                {
                    "type": "OccupancySensor",
                    "name": "Präsenz Büro",
                    "manufacturer": "Preussen",
                    "model": "Motion 360 KNX",
                    "OccupancyDetected": "EG.Buero.Praesenz"
                },
                {
                    "type": "MotionSensor",
                    "name": "Bewegung Flur",
                    "manufacturer": "Preussen",
                    "model": "Motion 360 KNX",
                    "MotionDetected": "EG.Flur.Praesenz"
                },
                {
                    "type": "ContactSensor",
                    "name": "Fenster Büro",
                    "ContactState": "EG.Buero.Fenster"
                },
                {
                    "type": "Doorbell",
                    "name": "Haustür",
                    "SinglePress": "Technik.Asterisk.Klingel"
                },
                {
                    "type": "Lightbulb",
                    "name": "Licht Büro",
                    "On": "EG.Buero.Deckenspots",
                    "Brightness": "EG.Buero.Deckenspots.dimmen",
                    "BrightnessMin": 0,
                    "BrightnessMax": 255
                }
                {
                    "type": "Lightbulb",
                    "name": "RGB Leiste Stube",
                    "On": "EG.Stube.Ledleiste",
                    "Brightness": "EG.Stube.Ledleiste.dimmen",
                    "BrightnessMin": 0,
                    "BrightnessMax": 255,
                    "R": "EG.Stube.Ledleiste.R.dimmen",
                    "RMin": 0,
                    "RMax": 255,
                    "G": "EG.Stube.Ledleiste.G.dimmen",
                    "GMin": 0,
                    "GMax": 255,
                    "B": "EG.Stube.Ledleiste.B.dimmen",
                    "BMin": 0,
                    "BMax": 255,
                    "W": "EG.Stube.Ledleiste.W.dimmen",
                    "WMin": 0,
                    "WMax": 255
                },
                {
                    "type": "Fan",
                    "name": "Ventilator Bad",
                    "Active": "OG.Bad.Ventilator"
                },
                {
                    "type": "Thermostat",
                    "name": "Temperatur Büro",
                    "CurrentTemperature": "EG.Buero.Temperatur",
                    "TargetTemperature": "EG.Buero.Temperatur.Sollwert",
                    "CurrentHeatingCoolingState": "EG.Buero.Temperatur.Modus"
                },
                {
                    "type": "WindowCovering",
                    "name": "Shutters office",
                    "CurrentPosition": "EG.Buero.Rolladen.Position",
                    "CurrentPositionMin": 0,
                    "CurrentPositionMax": 255,
                    "CurrentPositionInverted": true,
                    "TargetPosition": "EG.Buero.Rolladen.ZielPosition",
                    "TargetPositionMin": 0,
                    "TargetPositionMax": 255,
                    "TargetPositionInverted": true
                }
            ]
        }
    ],

    "description": "This is my development config file."

}